Chapter Four — Narrative Histories and Customs
Chapter 3 Narrative analysis
Chapter 4
Narrative Histories & Customs
The small Louisiana town of Castor—population 178—could still suffer the fate of the dozens of remotely located towns that fade from existence after the closing of a major employer. The town’s sawmill, and its only major industry, closed in 2000 after nearly 80 years in operation. What happens to the culture of such remote communities as Castor when the one element that has tied them together since their founding is suddenly taken away? A number of towns have faded into marginal villages or have been lost entirely as a result of such circumstances. Others have succeeded in redefining themselves and creating a new identity. In the wake of their sawmill closing, the people of Castor face a period that will determine the future of its people and the survival of its unique folklife as one of the last communities with an independently-owned sawmill. The informants quoted in this text provide examples of those who have knowledge and experience that could be valuable to keeping the town’s traditions intact.
When the Martin Timber Company sawmill opened just outside of Castor, the Louisiana timber industry was strong, though nowhere close to the phenomenal production that made the state the nation’s leader in timber production two decades earlier. The times were good, as illustrated in an old radio program script that focused on the industry’s history:
the 1920s and 1930s were the heyday of the sawmill in western Louisiana and east Texas. The Kansas City Southern Railroad paralleled the border between the state, and there was a sawmill every few miles along the track. This, before the oil days, meant that hauling finished lumber was one of the main markets for the railroad. (Pouncey 47)
When Kansas City Southern pulled rail service out of Castor in the 1980s, the plant was put into immediate dire straits. Martin exited the town quickly, selling the plant to the powerful Hunt family from Ruston. Railroad issues were just one of the many uncertainties faced by those in the industry. The hand-to-mouth nature of rural sawmills, in addition to rudimentary operational techniques, often put production above safety in the early days. As a result, danger was very much a reality to the people of Castor. The rural nature of the area, along with limited mobility, meant every aspect of working life required hard—usually dangerous—manual labor. The rural location also meant a doctor was not readily available.
The people of Castor have high hopes for their town, despite the many examples of towns that failed to survive closures. One of the most famous timber towns, the mammoth Louisiana Central Lumber Company, actually enveloped the town of Clarks, incorporating its own school, sports teams and social events. The mill closed in the 1950s, but the town and Caldwell Parish were never the same, according to William Childers in his history of the company: “The experience was observed throughout the entire community; and in spite of occasional spurts of business or industrial rejuvenation over the years, the parish never fully recovered from Louisiana Central’s closing” (47). The same phenomenon occurred in Castor after L&A sold out early in the twentieth century, but the town recovered to establish an equilibrium that still holds today.
Even though the sawmill is now closed, the residents of Castor still self-identify as belonging to a timber town. After all, the plant began operation in 1933 and was, in practice, independently run by Ellis Martin under the umbrella of his father’s, timber legend Roy O. Martin, regional timber company, which is still active today. The plant’s independence, coupled with the Martin family’s tremendous timber holdings, allowed it the rare opportunity to manufacture specialty wood items and to continue running even when the cyclical forest products market bottomed out (Bienville Historical Society 67).
Settlement Patterns
The timber companies shaped towns like Castor on a level of significance equal to that exerted by the prominent personalities who lived there. The industry’s advance was gradual and usually along creeks or railroads, meaning employees would move with the work, creating the environment for a skilled and loyal workforce for the employer. In return, workers earned a stable paycheck. Sometimes, after the work played out, employees had the means to start their own operations. Bienville Parish historian Billie Gene Poland has published two volumes on local history that demonstrate such migrant work. Poland explains the phenomenon she saw repeatedly in her research:
When the timber industry first got started, around 1900, some of the families came here with the timber companies—like the Greer family and the Harrison family. […] I have various family histories in the book. Usually, they will tell they came in with the mills. Several individuals had small mills on various creeks. I know the Huckaby’s had one on the creek close to Lucky where my husband’s father lived. (Poland)
Inhabitants of Castor arrived in much the same way. The early settlers of the area brought their own trusted employees, as did William Buchanan as he built the L&A Railroad that established Castor’s current location.
Workers sometimes moved away as well, as in the case of the Bienville Lumber Company that was founded in 1900 in the town of Alberta. Alberta existed practically on the outskirts of modern Castor. Timberman E.M. Werkheiser founded the company when he essentially moved his entire sawmill operation—workers and all—from Arcadia, the Bienville Parish seat. Werkheiser named the town for his daughter and soon it was thriving with numerous stores, schools, and churches, in addition to a post office and telegraph office. A 1956 letter from a former resident of the town recounts its ultimate fate:
By March 1915 the mill had exhausted it timber supply, and bought a large tract of timber at Forest Mississippi and began moving the mill in April of that year to Mississippi and by the end of the year the entire mill, including all of its machinery had been moved and a large number of the employees moved to Mississippi. The high christian character of the men and women moving from Alberta, La. to Forest, Miss. re-juvenated the little town of Forest. (Shamburger letter)
The town of Alberta regressed almost immediately after the mill left. Even older members of the Castor community have only a vague awareness of its existence. John Gray, a 75-year-old Castor resident said he only became aware of the former mill town in World War II: “My first knowledge of the mill was World War II and scrap drives. They were out digging for metal—old pipe, bolts, whatever, that would have been left from the last move of the mill. But no, I never saw the mill. The old millpond I was conversant with. We shot ducks on that.” Werkheiser presumably established the town to take advantage of the new L&A Railroad being built and the then-plentiful timber in the area. He was not alone.
Like Werkheiser, Gray’s grandfather and grandmother could smell the ingredients for success coming together with each new stretch of train track:
My grandmother/grandfather came here probably close to 1900, and they lived right there [motions out window] [ … ] somehow or other, he knew the Werkheisers, and I think he had prior knowledge that the railroad was coming through here. He moved from Red River Parish and packed up and moved. He bought 40 acres from Martin Hill—homesteaded 40 more—and when the railroad came through, and when the mill came here, Werkheiser came down from Arcadia. It just so happens that grandpa and Mr. Hill were right on the spot.
Opportunists like Gray’s grandfather abounded in Bienville Parish history, providing a vibrant and colorful backdrop for Castor’s growth over the following years. However, the comings and goings inherent in such opportunism offered little stability to the people who wanted to settle there. Three decades after the last L&A rail was completed, linking Stamps, Arkansas, and Alexandria, Louisiana, the L&A railroad was subsumed by Kansas City Southern (KCS), which promptly streamlined its routes. Fortunately, KCS decided to continue rail service through Castor, opening the door for yet another colorful timberman to establish roots in Castor, only this time the roots were lasting, and they would come to shape the town’s culture.
The Martin Management Style
The life of Roy O. Martin is a Horatio Alger story—a man who took meager means and knowledge and nurtured them into success by force of will. Almost a century in the making, the story of the Martin family timber dynasty has achieved legendary status in the public consciousness of northern and central Louisiana. Still, the company remains a regional. In an industry where consolidation means survival, Roy O. Martin Timber Company (ROM) remains independent, family owned, and relatively small. Still, ROM continues to blossom in the looming shade of timber giants like Weyerhaeuser and International Paper.
The secret to the company’s success has been and remains a substantial and stable timber supply and deep roots in Louisiana. While some companies outgrow their timber supply or have their timber supply outgrow their ability to support it, the ROM company has found a balance. Even in 2002, ROM’s 400,000-plus acres of timberland remain widespread in Louisiana. Hundreds of acres of those forests still grow in Castor, where one of the company’s first and most enduring operations existed until 2000. Though market and transport issues resulted in the selling of the plant, the rest of the company remains productive. Now all that is left of the Castor plant is the concrete slab on which it was built. The facility housing the former ROM sawmill was auctioned and removed in the summer of 2002. Still, the story of the plant, and its role in the development of Castor, still lives in the traditions of the town’s residents.
The story of ROM’s appearance in Castor (then named “Roytown” in the mill’s location two miles south of the Castor downtown) is legend to many of the townspeople and a product of memory for many more who witnessed events firsthand while growing up there. Lorris “Bud” Bogan grew up in the town and was an employee of the mill practically his entire working life, retiring as plant manager. He recalls how the Martin’s came to success in Castor: Ellis Martin, ol’ man Roy O’s son, he sent him up here to run this mill and he just kept puttin’ in it and puttin’ in it and makin’ money and makin’ money. Had these old trains that they run out in the woods, load the log on the little ol’ train and brought the log into the mill. They go so far all around, and then most the time, they say “Well, we’ve cut out” and then the truck come in, so they could go futher out. And kept, kept doin’ that. And then they’d bring logs in on the railroad. (Bogan)
Though Roy O’s intention was to cut his timber and leave Castor, the Depression intervened first, preventing such a practice. After the Depression, Roy O’s son was the one who kept the mill sustainable.
Ellis Martin inherited many things from his father, one of them being a stubborn streak. Since he was given the reigns to Castor specifically and was not involved at the company’s headquarters in Alexandria on a daily basis, he set about proving his prowess at the little plant that would be his domain for the next thirty years. While workers knew the name of the company their paychecks, Ellis was who they worked for. Overall, Ellis Martin’s management style was visible, but primarily hands-off. As noted by Julius Havard, a long-time employee, Martin was seen as available, but not a micromanager: “Well, until he moved to Alexandria I saw him everyday. He’d make his rounds everyday, and he would sit and talk to you, see if you needed anything. If everything was going all right he would go on and leave you alone.” In the 1970s, Martin was called back to Alexandria to straighten out financial difficulties at one of the company’s larger mills there. His move became permanent, setting the stage for a new era at the Castor plant.
As Ellis became more prominent in the running of ROM, his son, Johnny, was the next Martin to take direct responsibility at Castor. However, Ellis maintained a direct connection to the plant, visiting it nearly every week until it was sold to Hunt Forest Products Company in 1989. Linda Myers, a receptionist in the Castor sawmill office, recalls a typical visit:
Nine times out of ten when he would came in he would go into the front office. It was right across from me. He would put his stuff down and he would sit there and talk for a few minutes. Depending on who it was who that came through, nine times out of ten the plant manager was right in there in his office, and they would talk—maybe reminisce—find out what was going on in the mill, how the mill been running. If it was very important things, of course the door was shut. Many times, Johnny, his son, would come with him, because at that time, before that time they had moved the offices to Alexandria, and so they would come down once or twice a week. Johnny would. Mr. Ellis would always come on Tuesdays very seldom any other days. And I don’t know how many years he done that.
Martin’s tours became fabled for their clockwork timeliness. In their own way, they instilled confidence in the workforce. Martin would continue the practice in other ROM operations. In the summer of 2001, he was on his way to his company’s Chopin, Louisiana, plywood plant (the last plywood plant to be built from scratch in the U.S.) for a regular Wednesday tour when he was interviewed for this thesis.
Forestry & Logging
Bud Bogan’s previously noted explanation of ROM’s practice of cutting along roads and rails was typical of that for the rest of the industry as well. Mechanized equipment to haul logs was often rare, too expensive, or inadequate to the task of hauling the huge logs of the early twentieth century. Equipment of the time was even less suited to logging low-lying areas that, true to the Louisiana stereotype, were marshy and dangerous.
Ellis Martin was not only involved with the activities of the lumber mill, but the logging operations as well. He remembers, “When we started out we had mules and chains and the mule would drag the log to the truck, and you’d use a train to put it up on the truck” (Martin). Mules were selected because of their sturdiness and even temperament. Chains were harnessed to the mules and then hooked to the logs. Occasionally, horses were used also, but, as Billie Gene Poland suggests, they weren’t the best choice for the job: “Yes. In fact, my grandfather bought some mule that had been used and some horses. He bought two horses that had been used by the timber company and he wasn’t much of a horse trader, and he sort of got beat. Both of ‘em laid down in the cotton row and died; he didn’t have ‘em over a month before they died” (Poland). Slowly, mechanized equipment became the norm, replacing the beast of burden in the 1940s.
Similarly, the era of the crosscut saw was replaced by the mechanical chain saw. Crosscut saws were essentially long blades with handles on each end. A logger would hold each handle and move the blade back and forth across a tree to cut it. The tremendous time and effort that went into this process prompted the development of the chainsaw. For the loggers working in swampy areas, like those in Louisiana, the mechanical saws allowed logging crews to work more efficiently. Chainsaws were conceptualized as early as the 1800s, but development and widespread use emerged over the first half of the twentieth century. The first company to popularize the chainsaw was Poulan, which began in the piney woods of north Louisiana and has ties to the family of Billie Gene Poland. Poland says her family’s name was originally spelled differently:
Some of them stated to me when I visited Nash County North Carolina, where we came from, that some older ones got tired of telling people how to spell Poland. And he started spelling it like they spell the country. So part of them spell it the original way and some spell it the other way. I know several of the Poulans and the chainsaw people are some of them. They told me they made their first chainsaw with an old crosscut saw and a motor. He lived over on Swan Lake Road in Bossier City […] He has told me about the first one they rigged up. An old German man gave them the idea for it. (Poland)
Eventually, sophisticated equipment like skidders and truck fellers would essentially preclude loggers from having to touch the log during the cutting process. However, throughout the twentieth century, chainsaws remained an important tool for loggers, including the logging teams of ROM.
Though Ellis Martin may have never cut a tree himself, he still had a hand in logging practices. However, little other contact occurred between forestry crews and lumber mill crews. The division of labor was a sharp one, with the two entities making their only real contact when the logs would change hands. As plant manager, Bud Bogan remembers, “we had a man hired to tend to the forestry end of it. He was over the loggers and all that.” Ultimately, Bogan’s most significant contact with the forestry crews was in the signing of their checks.
When the Martins first moved into the Castor area, they intended to harvest hardwoods. The Black Lake block of oaks and various other hardwood species presented a challenge for the mule and crosscut saw equipped logging teams of the time. As changing circumstances made better timber available, and the Castor lumber mill more permanent, the company’s priorities changed, as Martin notes: “We quit cutting hardwood after about five years and hardwood in that country was too low grade, so we went to straight pine.” The switch to pine mandated forward thinking on the company’s part and would forge an eternal link between Castor and the timber industry as the company replanted much of its harvested acreage with pine tree seedlings.
By the time ROM began replanting its cut-over lands, reforestation was no longer a radical idea. Even in 1930s Louisiana, the concept had already found its way into law and widespread practical use by the state’s most conservation-minded timber men. As early as the 1920s, the Great Southern Lumber Company in Bogalusa was paying people to replant cutover timberland. However, since the area’s timberland had been nearly exhausted by the cut out and get out practices of the Bienville Lumber Company, among others, ROM had to commit in a meaningful way in order to maintain the mill at Castor for more than a few years. According to Martin, “everytime we cut a tract that we owned the land, we would replant it. When I sold that plant, I had 100,000 acres of timberland, and I still have it. We bring those logs down to Chopin now.” The practice continues to pay off in the area, which remains heavily wooded with several companies, including ROM, owning land there.
Mill Workings Though replanted timber is all that remains of the industry in Castor today, the everyday workings of the sawmill are still remembered vividly by those residents who were employed there. The work was monotonous and the temperatures extreme in the open structure of the sawmill, but it provided a steadiness and security also. No matter what products the mill produced over the years, the people took pride in doing their jobs well.
The Castor mill began life ordinarily enough in 1933. Ellis Martin describes it as “an eight-foot band mill. Just regular old sawmill is all I can tell you.” By the 1950s, the mill employed anywhere from two hundred to four hundred people, depending on the markets or who you ask. Bud Bogan started in 1956, a year after graduating from high school. The post-World War II American industrial spirit prevailing throughout the rest of the country was present at the bustling mill. During this time, the transition from manual labor to mechanized production was starting to become prominent. Buggies were used to transport materials through the various processes of the mill. Loading and unloading were done by hand. In early days, mules were used to pull the buggies around. Later, jitneys took the place of mules. Jitneys were trucks—usually an “A” model Ford or comparable Chevrolet—that had been shortened considerably from factory specifications. The buggies were hooked to the jitneys for transport.
The infrastructure of the industrial plant of the day was much different than modern facilities. Bud Bogan says the differences in infrastructure were apparent even in the mill’s foundation:
There was no concrete. They called it trams and bottoms. They took old, what we called dogboard and laid some crossways and then put runners on ’em and that’s how they run. Dogboard would rot and that was my first job, and my daddy, he was kind of a carpenter, and we had to replace them boards. Them ol’ boards was heavy, green board was heavy […] I worked a couple of weeks out there and started, was a helper on a forklift. And I drove a forklift for a couple of years and then I was shipping clerk.
Wooden trams were common in plants of the time, though not a sterling solution to the transportation issues in the facilities. Ellis Martin’s passion for plant improvements soon made trams and bottoms a thing of the past:
Well, way back in the beginning we had wooden trams. When you cut a hardwood log up, the last board is what you call the dog board. The dogs on the carriage hold it. It’s very low grade. So we would use those boards and make a wooden road out there. But that was something that you had to repair all the time. So I got a concrete mixer and made me some concrete trams. A road through a lumberyard, they call it a tram for some reason. Everybody does it, so we did it. That didn’t last very long cause we tried to modernize every time something came out.
Over the years, more than the mill’s foundation was upgraded. Equipment and entire sections were built on, depending on what the mill produced at the time. Modernizing, however, was not always called for. Some less modern elements worked just fine, such as the mill’s method for generating electricity.
Martin says the mill not only generated electricity for itself, but determined bedtime for its citizenry as well: “Hell, we didn’t even have electricity there. We had no lines down to the mill. Louisiana Power and Light hadn’t come in there yet. We had our own generator there. It went off every night at nine. So we went to bed or stayed in the dark.” The generators were powered by steam fueled by sawdust and other unusable wood byproducts—a magnificently reliable process, as stated by Bud Bogan:
The sawmill was running on steam. We had steam engines everywhere. I loved them old steam engines. They eventually got rid of all of ‘em in about ’90, ’91 or ’92, they took ’em all out and Hunt bought the mill. Well, about ’93. Martin had done quit using ’em. The big ol’ steam engine. That’s was something. I like to see ’em. They’re powerful. You know, it’s amazing to see something like that run.
The engines were vintage examples of early industrial design, with manual valves and gauges. They had twelve or fourteen foot flywheels and were made of cast iron. Their most impressive attribute, however, is that they were impervious to lightning and power surges, ensuring production stayed up and production costs down. Martin bought at least one of the engines from a cotton gin that was going out of business. Other engines he found at fire sales: “I used to go around to these sawmills that would be going out of business and I’d go around and pick up stuff. You could buy a lot of stuff that’s practically new from these old mills.” The design was used at just about any kind of manufacturing facility that needed power, therefore replacement engines were cheap and prevalent considering the rate at which agricultural facilities were built and subsequently died.
Workers were not happy to see the engines go in the early 1990s. They were even less happy to see the new computerized power system put into place at the mill. Retired millhand R.J. Nelson recalls the transition:
They went from the old boilers. There used to be about five of them I believe. A long time ago when my brother worked in there they had to shovel the fuel. They put it in the boilers. They had slabs stacked in front of them down below. A lot of times they went down and they threw slabs in them. They went from that to the high-tech stuff [ … ] And when they started to get the computer rigs I went, me and Bud [Bogan], we’d go to different mills, different places and look at the rigs and talking to them about it. When they bought the last one they bought, the computerized thing and I stayed down there and help them put it in, and I used it maybe a half a day.
Many of the 85 employees working at the Castor mill in its later years were older and by nature reticent about introducing computer technology into a system that had worked well for so many years. The workers had seen their share of technological improvements over the years, but the changes were primarily new incarnations of existing equipment based on proven designs, with a low learning curve. Like the workers at Castor, workers throughout the timber industry balked at learning the new technology. The computer revolution was birthed in conflict. Management was eager to realize the promise of reduced costs through more efficient, and subsequently less, use of manpower, while, to workers, the computer seemed the antithesis of the simple, elegant and intuitive designs of the manual equipment with which they had worked over a period of decades.
Long hours and long years of work were one thing employees and the mill machinery had in common. Often, workers walked to the mill, bringing their lunch with them. Bud Bogan describes a typical working day as “mostly ten or twelve hours a day, and, uh, when you went home, you generally took a bath and went to bed and got up the next morning and went back the next morning. You worked six days a week. Five and a half to six. No transportation.” The melding of man and machine became a necessity not only for production, but survival as well. Workers came to know the eccentricities of the machinery they worked on, which enabled them to detect maintenance issues that might not be obvious.
Over the years, equipment eased employees’ labors by degrees. However, no matter the amount of men or equipment, workers were still in for long hard days at their jobs. Bogan describes the mill operation in the 1950s as employing over 400 people, each of whom performed all manner of tedious duties:
That’s when we was loading them trucks by hand. Man, we had 400-something people working down there, you know. It was just common labor, period. You handled everything. At the planer mill, [workers] pulled the armor off the chair, put it on iron wheeled buggies—some of [the buggies had] rubber tires—and you’d shove it down, we called it down the hill, ’cause they had it a little lower level, and it just went down, and stack it on the floor. Five minutes later, another bunch in a front loader truck come by and put it on a buggy and carry to the truck.
The work was unyielding and changed little from day to day. Some employees worked in the same positions until they retired. Others went on to other jobs, and sometimes management. Of course, some of the management duties could be as tiresome as the manual labor as Bogan remembers: “The most, probably, I know at one time there’s 425 working there. When you have to sit down and sign 425 checks—every week. If your name is John Doe, it’s Jim Martin before you get to the tail end of the thing. Because, I’m telling you, you get so tired. They finally got a stamp.” The drudgery of signing documents aside, having money to cover the employees’ weekly pay depended on steady sales, which were difficult to accomplish in the tough yo-yo market of forest products.
Employees endured many “slow” times over the life of the mill when sales would slow to a snail’s pace, along with production. In the early days, production continued and inventories were allowed to build until the market picked back up. As the years progressed, market pressures forced companies to cut their inventories. Workers naturally worried when production was curtailed and looked to management to turn things around. In response, Ellis Martin and his management team came up with solutions that kept the mill afloat while others were sinking. Products
The products produced at the mill were shipped literally around the world. Castor employees still take pride in the diversity of products manufactured at their plant. Among other things, the mill made bowling alley flooring for noted industry companies Brunswick and AMF. Yellow pine lumber went to Indiana for furniture and to Dallas for picture frames. The mill even sent lumber to Egypt. Two of the more prominent orders Martin supplied were tapered crossties for the Mississippi River Bridge in Baton Rouge and a million feet of tent poles for the Army. In the mid-1980s, products the mill produced included. “door jambs, furniture dimension, industrial blocking and other ready cut parts for industry. By-products are chips (which are sold to paper and roofing mills) and shavings sold to the particle board industry” (Bienville Historical Society 67). R.J. Nelson recalls being involved with a specialty product being manufactured for France in the 1960s:
One time they came down and they called the stuff “fleeches.” It was going to France, I think, that was the first export I knew anything about. And we had a guy come down here and I had to go out there with him to tell me what they want, you know, and it had to be a full two inches after it went through the kiln. And they didn’t want it edged, you know, they had to have all the bark off it but they didn’t edge it at the mill, it went out and they run it through the kiln and went to whatever ship I guess.
Another time, the mill was charged with manufacturing keel blocks, which are blocks of wood used to hold up the keels of ships during manufacturing. Martin made the blocks of government-mandated white oak for shipment to Seattle, Washington. Ultimately, Martin understood the principles of business, and lived by them: “Our lumber markets were all over the world. It somebody had the money and a good credit rating, we’d sell it.” The company’s customer-driven philosophy kept the Castor operation alive while others succumbed to market downturns. Positions & Camaraderie
The relative hardship and danger faced by those working in the forest products industry creates a sense of closeness among employees even today. In the case of Castor, this sense of closeness was intensified due to the fact that brothers and sisters, fathers and sons and every other permutation of familial relationships could be found working together at the mill. Like a family, there were certainly disagreements, but, as noted by Linda Myers, few were lasting:
You think for something to be here for that period of time, generation after generation worked there. This is what amazed me as well, people could work there and quit and find another job, most places you couldn’t go back there to a business, but these people were hired again and again. And you only find that in a small town. Like I said, I worked in a city and you just didn’t find where you could go back to the same job and nobody would be mad because you quit.
Entire families commonly passed through the mill at one time or another. After all, there were few other employment options. Julius Havard states that proximity drew not only the Castor populace, but people from surrounding areas as well: “All of my family worked there. My daddy retired from there. My oldest brother worked there until he went into the service. Every one of my brothers worked there and two of my sisters worked there. We had people from Ringgold and Saline around ten or twelve miles off and they would drive but most of the people that worked at that mill lived right around here.” Other narrators note that foremen were often brought in from other places, though the mill employed people from Castor and Ringgold, by and large. More than a few of those employed by the plant by the time it closed had fathers and grandfathers who had retired at the mill.
Work structure was hierarchical, and the new or inexperienced employees were often given the most tedious tasks, much like Bogan’s job of replacing foundation boards. Each generation literally grew up together, both in terms of maturity and job responsibilities. Workers would train one another and depended on their own ingenuity to solve problems. Havard first worked with about thirty others at the mill’s cut-up plant. He explains his work at the cut-up plant:
We’d run lumber through there and it would cut all kinds of different grooves in it with furniture parts, dresser drawers, and stuff like that [ … ] I would get to watching James Thomas on setting it up and watching him and he didn’t have any idea what I was doing, I learned to set it up myself. So when he was busy, I could go ahead and set the machine up and just keep running and we wouldn’t have to wait on nobody. And I went from there to shipping clerk and then the foreman he got sick and he passed away so I took his place for about probably fifteen years. He was sick probably about a year and he passed away. I took his place, and like I said for about the last fifteen years then they shut down.
Like Bogan, R.J. Nelson began his career at the mill doing maintenance chores, eventually winding up at the position he held the longest, which was working with the saw. He describes his various jobs at the mill: “I started cleaning up and then I started oiling. […] And helping the millwright and then I got the millwright. Then I started setting blocks and then I started with the carriage and then I got saw.” Because of the family atmosphere at the mill and the fact that most were career employees, communication was an essential part of the work process. Regular meetings were held to discuss maintenance and safety issues, providing an opportunity for employees to take part in developing solutions to make the mill better.
Outside formal meetings, employees were very casual in their interactions with one another. One prevalent illustration of these interactions was the use of nicknames. Nicknames “signify a sobriquet or an appellation used instead of the real name of a person, place, or object” (Shankle vii). The device of the nickname may derive from, and serve, a variety of purposes. Nicknames may elevate, berate or serve as a type of endearment. They may also serve to abbreviate or simplify a name. Often, they describe affiliation or physical or personality characteristics.
The nicknames used at the Martin mill in Castor illustrated many of the nickname usages. R.J. Nelson was called Cotton because “my hair was real white, just about like cotton.” Though Havard says he was one of the few that did not have a nickname, he describes the usage of them as prevalent and, sometimes, permanent:
Havard: The best I can remember, I didn’t have a nickname, but a lot of people did. Just about everybody out there had a nickname.
Guin: Tell me some of the nicknames.
Havard: Well that brother of mine that worked out there, he was Wiz, and J.B. Cook we called him Cobb Cook. There were a bunch of nicknames, I can’t remember them all. Jerry Anderson, we called him Speedy.
Guin: Was he really speedy?
Havard: No, he was so slow. He was a good old boy, but he was so slow we called him Speedy. Guin: Well what were they saying about your brother then by calling him Wiz?
Havard: Cobb Cook gave him that name and I never did find out why he started calling him Wiz, but that name stayed with him till the day he died.
Some nicknames remained in usage so long that their original meanings were lost. According to Havard, some workers, like “Snooks” Guin, had their nicknames practically replace their first names. Snook’s brother and co-worker, Willie, was nicknamed “Mush.” Minorities also got nicknamed. One African-American man working as a trimmer at the mill was called “flitterfoot.” Though differing in derivation, nicknames were born out of familiarity, as recalled by R.J. Nelson:
RJ: Oh man, I knew everyone in the country.
Guin: Did they all have nicknames?
RJ: If they didn’t have one, we give them one.
The nicknames used at the mill were generally playful and fraternal. Women usually did not have nicknames. Overall, the monikers contributed to the familial spirit in this labor intensive and dangerous occupation. Commissary
The sense of community often found in the sawmill town was usually by design. Mill owners helped keep their employees close and loyal. One of the ways this loyalty was often developed was through a commissary, or “company store,” that was located close to the mill. Commissaries typically carried groceries, meats, tobacco, and dry goods. According to one of Carroll Pouncey’s radio scripts about sawmill life, there were few needs the company store did not fill: “The commissary not only supplied all the corporeal needs of the sawmill workers, but was also the social center for the men folks” (10). Since few employees had automobiles, commissary workers would typically take items ranging from ice to kerosene to workers’ homes (Smith 91).
Most narrators recall the commissary adjacent ROM in Castor. Hugh Wimberly remembers employees having to visit the old Sledge Store downtown after dark because, “if they caught you not trading at their store, chances are they’d fire you. Most of those sawmills printed their own money too of course you couldn’t spend it anywhere but in their store.” The Castor sawmill distributed its own tokens at one time. R.J. Nelson says it also debited employee checks for some items. However, unlike some larger mills, it did not keep its own banking system, according to Wimberly, whose father was a banker in Castor.
As a concept, the commissary faded from existence after the 1950s when the lives of employees became less intertwined with work. The commissary at Castor burned, and being outdated for the time, was not rebuilt. Shotgun Housing
The mill provided housing to help retain employees. These “shotgun” houses, as they are commonly known, were built in close proximity to the mill, somewhat like the pattern left by the pellets of a shotgun shell. The construction was simple, with just two or three rooms. The simple homes were affordable and gave employees and their families a sense of autonomy. They were commonly one-story and one room wide, with a front door on the gable end. Architectural historians believe they were based on Indian or Haitian slave homes and were suited to the Louisiana lowlands (Glasse 218).
Though not acknowledging the “shotgun” moniker, Ellis Martin remembers financing homes for his employees, especially the poorer families: “ I financed quite a number of houses for my employees. We had transient labor so I’d finance a house for some of the employees and they’d stay there.” While some employees remained in the houses for some time, most saved their money and bought or built homes elsewhere in the area.
The homes were built in rows next to the mill, with little distinction among them except for their placement along the railroad tracks leading into the mill. Hugh Wimberly remembers how this difference provided a telling illustration of the idiom, “wrong side of the tracks”: “I’d imagine that there were around fifty houses at the sawmill that the sawmill people built. The railroad track goes in to the mill. On one side of the track were white person houses and on the other side were black person houses. There were a lot of people back there but all those houses are gone now.” All that remains of the homes are the woods and pasture where they once stood and the memories of those who lived there. Though the shotgun homes were becoming less fashionable in the 1950s, a natural event helped wipe them away in Castor.
In 2000, a series of tornadoes ripped through Castor, destroying much of what was left of the downtown area. The damage was devastating to the town, but tornado damage was a calamity Castor had endured before. In 1952, tornadoes hit the area, destroying many of the homes and killing several people. Frances Guin relates the story:
F. Guin: Used to have a lot of houses, when Roy built that mill there, they had a lot of houses built all on both sides of the road. We used to live in one. Then a tornado came along and blowed ’em all away.
J. Guin: Really, and those were houses that mainly employees of the mill lived in?
F. Guin: Yeah. The workers. Some of ’em was hurt badly and some of ‘em was killed. Willie’s [husband] aunt, uncle and first cousins were all killed.
J. Guin: That must have been the uncle that my dad said had been sucked up in a tornado.
F. Guin: Not only uncle, but two aunts and an uncle and cousins, there was a bunch of ’em. The tornado just blowed ’em all out through the field.
While construction of shotgun housing was less than solid, the path of the tornado made the issue moot. The mill was repaired and reopened, but inhabitants of the shotgun homes sought out more permanent homes on their own, usually with land. These permanent homes gave workers more independence, but also required more work to maintain them, leading many to farm to raise extra cash.
Home life
The ten or twelve hour days at the sawmill or in the fields did not mean the end of the workday for most people. From there, they often had additional jobs or some type of moneymaking work at home to help make ends meet. According to Bogan, the side work was generally just as brutal as the day jobs: “A lot of ‘em farmed. And, they would get their stuff on the credit till they got their crop in. And if they lost their crop, they was in a bind, they had to get out and try to hew some crossties or something to make a little money.” The Guin family worked in the fields in the evening after their daytime responsibilities were done. Frances Guin says the work was so hard, even the animals couldn’t stand it:
We raised…six bails of cotton …I’d drive the mule…and boy it was hot! The sun was beamin’ down on us. And we’d stop the mules at the end of the row, and this big ol’ pecan tree out there … And the mule … he went to the shade! He was draggin’ off … and I ran and grabbed him, hollerin’ “Whoa! Whoa! Whoa!” and he just drug me right on to that pecan tree! I never will forget that. (214-227)
Children weren’t exempt from helping out with such chores, as the ability to accomplish more work was the only benefit to the large families common to that era. As one of the younger children, Bolyer was spared many of the more difficult tasks, but she was brought along and placed on a pallet while the rest of the family would pick cotton.
In spite of the hard work, the children in the community still played and had fun. Girls enjoyed the perennial favorites of hopscotch and jacks while boys made slingshots and played variations of Cowboys and Indians. Children were enterprising enough to construct their games. Bogan remembers one of his favorite forms of recreation, the flying jenny:
It’s a 2×12 [inch piece of lumber], on a post, with a hole in the middle and a pin up through it and two people would get on each end and one would get that thing goin’ in a circle and just, they’d eventually, just run out, you know. And you just go ‘round and ‘round and that, that was it.
Almost all of the narrators played on flying jennys, usually getting hurt in the process. They also describe tomwalkers, which were crude stilts fashioned by the kids with scrap wood. Bolyer recalls simpler uses for scrap wood also.
We’d play with just pieces of wood. You know, we’d make ‘em like our cars and trucks and get down in the dirt and play …We didn’t have toys like kids do today; we made our own toys. …We had to use our own imagination.
Despite the relative lack of luxuries, the narrators recall their childhood days as happy ones. Still, the typical Castor household changed dramatically in the last half of the twentieth century. As mobility increased, the people became less isolated and many of the traditions that had persisted for decades, though still existing in the memory of many in the community, began to fade into disuse. The evolution of the sawmill industry, which now had laws to protect worker safety and rights, increased quality of life, but decreased dependence on traditions that had been created from necessity.
�PAGE \# “‘Page: ‘#’�’” ��This needs to go somewhere else