Timbertown
North Louisiana Timber Folklife Archive

Timbertown · Oral Histories · Narrator Record
TIMBERTOWN · ORAL HISTORY

R.J. Nelson

A Working Life Inside the Sawmill

Nelson was born and raised in Castor and spent his life in the area. He entered the sawmill in 1954 at eighteen or nineteen and worked his way through cleanup, oiling, millwright work, block setting, and sawing.

Interview date15 May 2002
CollectionTimbertown
Source statusFull transcript survives
Online accessFull transcript

At a Glance

Nelson was born and raised in Castor and spent his life in the area. He entered the sawmill in 1954 at eighteen or nineteen and worked his way through cleanup, oiling, millwright work, block setting, and sawing.

In the Interview

Nelson remembers the mill fire from his childhood, the progression of jobs inside the plant, technological change, and the close-knit culture among workers. He also discusses race and labor using language characteristic of his time and personal experience; those passages should be preserved with historical context rather than silently rewritten.

Collection Status

Full standalone transcript survives; edited transcript also survives; digitized audio not yet located.

Editorial note: This interview contains racial terminology that is offensive today. It should be retained in the historical transcript with clear editorial context rather than silently altered.

Rights & Provenance

Northwestern State University has confirmed that the Timbertown project records were filed as unrestricted. The original release form survives and allowed narrators to make individual choices about identification, tape retention, and archival deposit. Those narrator-specific checked choices have not yet been matched to this record, so this page currently provides description and source status rather than a complete transcript.

Full TranscriptRead the surviving primary-source transcript and transcription note
Transcription note

This edition preserves the wording of the surviving transcript. No attempt has been made here to silently correct dialect, grammar, uncertain readings, or historical terminology.

Editorial note: This historical transcript contains racial terminology that is offensive today. The published edition preserves the surviving transcript except that one racial slur is masked.

Childhood and Family Life in Castor

Guin: What is your name?

RJ: R.J. Nelson.

Guin: RJ Nelson. Does RJ stand for anything?

RJ: Depression, I was born in the Depression years and they couldn’t afford a name.

Guin: You know grandpa was the same way. Of course he was born in the 20’s and his name was RJ. And when he went into the military to serve in WW II he had to come up with a full name. The army would take him with just initials.

RJ: I had a brother that way too.

Guin: And he had to come up with something. So he came up with Roy Joseph. So, yeah, I can understand that. Were you born in Castor? You were born and raised. And lived in this same area your whole life or have you ever move off?

RJ: I never moved off.

Guin: Tell me a little bit about your childhood. What was it like? What kind of games did you play? Where did you go to school?

RJ: I went to school in Castor. About the only games we had were ball and (??? 012 deer and dog?) and stuff like that.

Guin: So y’all hunted and fished…

RJ: Hunted and fished, yeah.

Guin: What did you do for toys? Did you make your own toys? Or buy them from the store? My Aunt Margaret talked about that they would get blocks from the sawmill and play cars and stuff with them.

RJ: About the only toy that I had bought was a wagon.

Guin: So you pretty much grew up around the sawmill. That was always there from the time you were born. I think the sawmill was built in ‘33 and then it burnt down and was rebuilt in ‘39.

RJ: ’39 or the ‘50’s I don’t know what. The late ‘40’s or ’50’s somewhere in there. It was in the ‘40’s I think. I remember when it burned.

Guin: What was that like?

RJ: Just a big glowing in the dark.

RJ: Now your grandpa got my daddy out of Castor Creek. I heard my daddy say if it hadn’t been for Mr. Kit Guin he would have been dead. He would have drowned. They were in swimming and he had a leg cramp and Mr. Kit got him out.

Guin: Really!

RJ: I heard him tell that at his funeral.

Guin: Do you know how old your dad was then?

RJ: No, I don’t.

Guin: Did your dad work at the sawmill.

RJ: No. My daddy was a preacher and a farmer.

Guin: Did you help on the farm?

RJ: Oh yeah.

Guin: What did you do?

RJ: Chopped cotton, picked cotton, whatever. You name it, I done it.

Guin: So it was kind of a family business?

RJ: It wasn’t a business. It was just getting by.

Guin: And you sold the products at the market here? Or you took it somewhere?

RJ: They had a gin in Castor. I think (??? 41) . I think that’s who that is (??? 42).

Guin: And how many years did you do that?

RJ: (??? 43)

Starting at the Sawmill

Guin: When did you start working at the sawmill?

RJ: In ’54.

Guin: That would have been about the time Bud Bogen started. Or close to it.

RJ: No, he started after that. A year or two.

Guin: What did you do when you first started?

RJ: Cleaned up underneath.

Guin: Went around cleaning up. You were a young man, about what late teens early twenties?

RJ: 18, 19

Guin: And that’s usually how people started at the mill, the younger folks. They started cleaning up and kind of worked their way up.

RJ: Yeah, probably so.

A Career in Mill Work

Guin: What did you do through the years? What different positions did you have in the mill?

RJ: I started cleaning up and then I started oiling. Every morning before we start up, right before the time (??? 57). And helping the millwright and then I got the millwright. Then I started setting blocks and then I started (??? 60) with the carriage and then I got saw.

Guin: What position did you hold the longest?

RJ: Sawing.

Guin: Did you work with my grandpa out there?

RJ: He was working at the plant. I was in the sawmill.

Guin: What were the big events that happened while you were working there? You mentioned the time it burned but that was really before you started.

RJ: That was before I started. I really wasn’t big enough to know a whole lot about it. Nothing more than the mill burned.

Guin: Anything else that you remember about the plant — big stuff that happened throughout the years?

RJ: Not really. Just changes. They call it progress come. They done away with the block setter put in automatic set works. Then they went from that to the scanning system. That’s about it.

Guin: Did you work with pretty much the same group of people the whole time?

RJ: Just about it.

Guin: Same people stayed there? They were from Castor mostly? Or did they come in from other places?

RJ: The foremans came in from other places. Most of the people that worked there were raised here. That and Ringold

Guin: I know Mr. Ellis Martin lived in Ringold.

Nicknames and Workplace Culture

Guin: You mentioned yesterday the nicknames that people had. My grandfather had one.

RJ. Yes, his was ‘Mush’.

Guin: Did you have one?

RJ: Cotton.

Guin: And where did those things come from, where did the nicknames come from?

RJ: My hair was real white. Just about like cotton.

Guin: Where did papaw’s come from?

RJ: I don’t know where he got his. He had a brother. I don’t know what his real name was. They called him ‘Snoops’.

Guin: What were some of the other ones? The other people that you knew.

RJ: Like who?

Guin: Any of them. You know where just gave them a nickname.

RJ: Oh man, I knew everyone in the country.

Guin: Did they all have nicknames?

RJ: If they didn’t have one we give them one.

Guin: Do you remember some of the other nicknames? Can you throw out a few more?

RJ: Let’s see, I guess you are supposed to call them black now, huh….

Guin: Anything you want to.

RJ: There was one name, flitterfoot. His name was Emil, Emil Bracken, a black dude.

Guin: And where did that name come from?

RJ: I have no idea. He had that when I went to work there.

Guin: And what did he do?

RJ: He was one of the trimmers.

Race, Integration and Mill Labor

Guin: So did the blacks and whites work in the same areas?

RJ: Yeah.

Guin: From the time you can remember?

RJ: Blacks and whites got along good up until all this other, you know when it all started.

Guin: In the late ‘60’s?

RJ: Yeah, the integration crap, whatever. June the 19th the mill didn’t run. They always called it “N—— Day”.

Guin: Why did they do that?

RJ: I don’t know.

Guin: They took a holiday?

RJ: Supposed to have been the day they was freed, wasn’t it? Something to that effect.

Guin: What was the mix like? More whites that worked there? Half and half?

RJ: Yeah, probably 50:50 I imagine. (??? 124) but everyone got along good. Didn’t have no problems with nobody.

Guin: When did they start bringing women in there?

RJ: I don’t know when they put that, I think they called it a (??? 127) plant. We always called it (??? 128) plant. I don’t know what it is called. You know, the lighter stuff, the material was light. That was when most of them started anyway. I don’t know when that was, in the late 60’s probably; somewhere along in there.

Guin: How did that go? I mean, were ya’ll kind of surprised?

RJ: I never worked around any of them. They wasn’t any of them in the sawmill.

Guin: And then I guess women started going into other areas of the plants. I know Aunt Margaret was a grader for a little while.

RJ: At the plant. Or at the (put up plant??? 137) one or the other.

Danger, Injury and Occupational Memory

Guin: I know it is a dangerous profession. I worked in the timber industry myself in an office with Willamette. It is real dangerous being around the saws and everything. Did you ever see an accident or have you ever been in an accident at the plant while you were working?

RJ: Yeah, I’ve wrecked (??? 144) before and there was a man was riding. He didn’t get hurt much but I knew something had happened to it and I motioned to get him a hold and he did. He took seat and all off with it.

Guin: Were you hurt badly?

RJ: No, I was in the saw cab but he was riding (ferry ??? 150) and the controls come loose (…??? 151) stacked it up.

Guin: Have you ever heard of or seen anyone else get hurt while they were in the mill?

RJ: Yeah. I seen ‘em get wound up. They’d be wearing a shirt on the outside and get against the shaft and they’d catch it and it wind ‘em up, you know. Really didn’t hurt them that much. I saw one guy get his leg pulled up in the chain. That was probably the worst one I saw. And I saw a man get his arm, the chain loaded at the bottom, it was an oval deal you know, and he was going to reach in here and get something out and the chain caught him and carried him along to the sprocket – broke it up.

Guin: What does that do to you when you see stuff like that? You know you got to work there everyday; you gotta keep on working.

RJ: You have to not let it bother you.

Guin: Just be careful yourself and make sure it doesn’t happen to you right?

RJ: There was a man died on the log (day??? 172) but that was heart attack. Before my time a log fell off the truck and hit a man and killed him too but I wasn’t over there then I just heard about it.

Guin: Have you ever hear the story, and this one kind of goes around in the timber industry, about a guy who fell in a chipper one time?

RJ: Dodge?

Guin: I’m not sure where it was but I heard a lot of people make reference to it.

RJ: I’ve heard of it. There was guy, I know him, I used to go watch him saw. He lived around Saline. They was working on a carriage or something or other and, a long time ago when they used stain, you know, if your valves wasn’t set right your carriage would creep up on you, well anyway it creeped up on him and it caught this guy and it cut his arm off. He got his arm in the saw and it cut it off. Heard of a man who got caught in the chipper but I don’t know where it was. I rather think it was Dawson but it may not be.

Guin: But that is just a story that you’ve heard somewhere; you don’t remember any specifics about?

RJ: No, I don’t. I don’t know anything about it. I just heard of it.

Small-Scale Lumber Work After the Mill

Guin: So you own your own sawmill now?

RJ: Not a sawmill, no.

Guin: What do you do now?

RJ: We make keel sticks, ???(197) material and cross-outs. That’s a little deal, 2 by 2 with a groove in it, one where you put the band in it. We don’t make many of them.

Guin: What do you do with it? You sell it to…?

RJ: Sell it to lumber mills.

[phone rings]

Guin: You started in ’86.

RJ: yes

Guin: That was pretty much before the sawmill shutdown; it shutdown in about 2000. Why did you decide…

RJ: We worked both of them for about two years. I was working days and my son was working nights. He’d start up in the morning and I’d finish up in the evening.

Guin: That works. What made you decide to get into that on the side?

RJ: I don’t know.

Guin: You knew how to do it?

RJ: Michael talked me into it.

Guin: You’re still doing pretty well with it?

RJ: Doing OK. We didn’t get anything out of it for two years. What little bit it made we put right back in. I think I got a pair of insulated coveralls. That was the way we were doing it. He was working nights and I was working days. We didn’t have much ??? (218) to know of.

Guin: You bought the equipment from somewhere else?

RJ: Yeah, just a bunch of junk.

Guin: Kind of pieced it together and made it work?

RJ: We started out that way. We had Detroit engines and you know all that kind of stuff. We got 480 out ??? (224).

Technology, Markets and the Mill’s Closing

Guin: Well tell me about your thoughts when they announced the plant was going to close here.

RJ: Martin or Hunt?

Guin: Well, both because that is a major transition. It was in the Martin family for a long, long time.

RJ: Yeah, I worked for the Martins and I knew Mr. Ellis. I knew they were going to shut that mill down. Had nobody told me but I knew in my own mind that was because they got to going mass production. Ellis never done that. He was always wanting the grade out of it. You know what I am saying? When they got to doing away with that and just hitting two sides and running through the game. That’s just not as smart. I knew they was going to shut it down. I didn’t know when.

Guin: From what I can read, Ellis Martin tried to get quality products, value-added products, out of this plant. I mean he talked about keel blocks, way back when, and other things that would go to states like Seattle and the northwest…

RJ: Yeah, they sent everywhere and one time they came down and they called the stuff “fleeches”. It was going to France, I think, that was the first import I knew anything about. And we had a guy come down here and I had to go out there with him to tell me what they want, you know, and it had to be a full two inches after it went through the keel. And they didn’t want it edged, you know, they had to have all the bark off it but they didn’t edge it at the mill, it went out and they run it through the keel and went to whatever ship I guess. That was the first export I knew anything about. I don’t know really when that was; it was in the ‘60’s.

Guin: Did they send any people from overseas here to take a look at the plant?

RJ: Yeah, there was a man came here. You couldn’t understand him talking to you or nothing but to tell us what he had to have.

Guin: And the guy was from France?

RJ: Evidently he was from France. They just brought him up there and we was out in the log yard talking.

Guin: The plant, from what I understand, has been modified a few times through the years to make different value-added products. It hasn’t stayed exactly the same.

RJ: No, they was upgraded but then it went all this automatic stuff.

Guin: And I imagine that there has been a lot of differences in the number of people that actually worked there during certain times as they upgraded the plant. It became fewer?

RJ: Became fewer.

Guin: About how many people worked there when you started?

RJ: I don’t know.

Guin: Probably hundreds? A couple hundred?

RJ: More than that I imagine. When all it was running it would be over two hundred.

Guin: And they were still working on steam then?

RJ: We got off steam, I don’t know, probably three years or so before they shut down. I’m just guessing, I don’t know. After I retired, they would come up here and get me to go down and work on the ??? (292). There wasn’t nobody else. I don’t remember how long it was actually. I was a good while.

Guin: They stayed with steam a while past some of the other plants around. Mr. Ellis said it was just reliable and that was why they kept it so long when he was there.

RJ: Cheaper too.

Guin: And cheaper and that makes a big difference.

RJ: And when they started to get the computer rigs I went, me and Bud, we’d go to different mills, different places and look at the rigs and talking to them about it. When they bought the last one they bought, the computerized thing and I stayed down there and help them put it in and I used it maybe a half a day.

Guin: When did you retire?

RJ: Heck, I don’t remember.

Guin: Before Martin sold out?

RJ: Yeah.

Guin: Do you remember how the people felt around here when Hunt decided to close the plant down because you weren’t there then?

RJ: Disheartened because that’s all there is around here. There’s nothing else around here to do.

Guin: Did you find people, did they move off after that, after the plant closed?

RJ: They had to or drive a long way to work.

Guin: Some people work in Arcadia…

RJ: and Shreveport.

Guin: Shreveport.

RJ: Coushatta. Spring Hill, I know of two, three of them who is at Spring Hill.

Guin: There still does seem to be a good many people around here. The highways are pretty busy…

RJ: The same people live here that was a part of it. I only know of one or two who have moved off but they have to drive a long way to work. ??????? (334)

Family Labor and the Workday

Guin: And your family lives around here? Brothers? Sisters?

RJ: All of them live around here.

Guin: You mentioned a brother earlier. Did he work for the sawmill too?

RJ: Yeah.

Guin: What was his name?

RJ: JR. He worked in the log woods and ended up a mill foreman for Martin. He retired before Martin sold out.

Guin: So JR and RJ?

RJ: Born in the Depression years. Use the same initials just turned them around. Had another brother Donald Ray. He worked in the shop. He was a machinist. Had two half brothers who worked over there, Cliff and John. John fired the ??? (353). Cliff worked ??? He worked ???

Guin: So when you’re working at that plant it was kind of a family thing. There were a lot of families who worked there; different members of the family.

RJ: Yeah, Ellis Martin called me in the office one day and asked me what I was going to do with that old Nelson place. I told him I didn’t know. Why? He said a guy from Wilamette had asked him about it. Said somebody needed to do something with it. They were fixin to try and get it. Anyway he said that the guy asked him how come he hadn’t done got it and he said there were too many worked over there; there must have been ten. The Nelsons worked over there at that time. I have some first cousins who worked over there. Four or five of us worked over there.

Guin: Tell me a little about your workday. Was it the typical late hours?

RJ: Most of the time it was ten. Up until the last five or six years; eight hours.

Guin: You’d have lunch there or would you come home for lunch?

RJ: Most times, when I first started I had to eat there. Then it got to where I would come home for lunch. Had my own house and it was close enough.

Guin: You are probably not old enough to remember but I hear there was a commissary there?

RJ: Yes, it stayed there until it burned. And the commissary, I think, I don’t know how they come up with that name, but I think they could go down there and get stuff. ???404 There was a few ??? in the lumber company. And it was just up the road before Martin done put in there. Anyway the workers could go in there and get stuff and they’d hold it out of their check. I think that is what the commissary ??? 410

Guin: So it wasn’t like a real commissary?

RJ: It was just a store. We always called it a store.

Guin: And they could just take it out of your check?

RJ: No, they didn’t do that that I know of, while I was there.

Castor After the Sawmill

Guin: Tell me a little about the changes you have seen in Castor, since you were a boy, up until now. How has the town changed?

RJ: We ain’t got a whole lot of town left. There used to be, I forgot how many stores up there. Two filling stations.

Guin: I met with Miss Mary Hammer yesterday and she was telling me about, of course this is before your time really, but there used to be two hotels downtown.

RJ: There used to be a hotel down there before my time. I went to school with Mary. I finished school with Mary. As a matter of fact, her mother and my mother are high sisters. But anyway, yeah there was a hotel. I don’t know that second one, a barber shop, six grocery stores, two filling stations and a post office. Now all we got is one store, one station and the post office.

Guin: Are you still living on the same land that your father lived on?

RJ: This house is not on that. My brothers live over there.

Guin: So it is still within the same family. Do they farm it at all?

RJ: Cattle is all

Guin: Anything else you can think of about the sawmill days you want to tell me?

RJ: Not really. It was just sawmill days is all.

Guin: Kind of an end of an era they don’t have sawmills like that anymore.

RJ: No, there is nothing like that anymore.

Guin: Things have changed.

RJ: They went from the old boilers, there used to be about five of them I believe. A long time ago when my brother worked in there they had to shovel the fuel. They put it in the boilers. They had slabs stacked in front of them down below. A lot of times they went down and they threw slabs in them. They went from that to the high-tech stuff.

Guin: Did they use chips back then?

RJ: They used the waste from the (??? 484) for the fuel where now they, or when they shut it down they was using just the bark, chips were the most preferable. I say, we used the bark and the curls, where it was off sized, it wouldn’t go through the shaker screen, you know what I am saying. ??????? 495

Guin: I believe that is about it. I appreciate you talking to me.

PAGE 1

Narrator Catalog CardView the interview record, source status, access & citation
Record
Interview with R.J. Nelson
Collection
Timbertown
Interview date
15 May 2002
Interviewer
Jeffery K. Guin
Narrator
R.J. Nelson
Place / context
Castor and Bienville Parish, Louisiana; Timbertown fieldwork, 2001–2002
Themes
Mill labor; occupational progression; technology; workplace culture; race and labor; local identity
Source record
Full standalone transcript survives; edited transcript also survives.
Online access
Full surviving transcript published on this page.
Rights / provenance
Northwestern State University has confirmed that the Timbertown project records were filed as unrestricted. The project release form survives; narrator-specific checked choices are still being reconciled with the surviving documentation.
Status
Published narrator record; transcript online; digitized audio not yet located.
Citation
Guin, Jeffery K., interviewer. “Interview with R.J. Nelson.” May 15, 2002. Timbertown. Voices of the Past. https://voicesofthepast.org/timbertown/timbertown-oral-histories/timbertown-rj-nelson/